ATS22C48Q
Schneider Electric SE
Softstarter ATS22 480A 400V 施耐德(SCHNEIDER) 软启动柜 Schneider Electric component ATS22C48Q: soft starter-ATS22-control 220V-power 230V(132kW)/400...440V(250kW) Schneider Electric ATS22 系列 480 A 软启动器, IP00, 250 kW, 230 → 440 V
规格参数
合规参数
标准EN/IEC 60947-4-2
合规性Conducted and radiated emissions conforming to IEC 60947-4-2 level ADamped oscillating waves conforming to IEC 61000-4-12 level 3Electrostatic discharge conforming to IEC 61000-4-2 level 3Immunity to electrical transients conforming to IEC 61000-4-4 level 4Immunity to radiated radio-electrical interference conforming to IEC 61000-4-3 level 3Voltage/current impulse conforming to IEC 61000-4-5 level 3
防护类型Phase failure on lineThermal protection on motorThermal protection on starter
认证CCCCSAC-TickGOSTUL
电气参数
输入端750 Ohm
噪声56 dB
输出端(R1)relay outputs 230 V running, alarm, trip, stopped, not stopped, starting, ready, C/O(R2)relay outputs 230 V running, alarm, trip, stopped, not stopped, starting, ready, C/O
电路20 W
数据速率4800, 9600 or 19200 bps
频率45...66 Hz
接口RS485 multidrop
额定功率250 kW
额定输出功率132 kW at 230 V250 kW at 400 V250 kW at 440 V
额定电压440 V
输出电流0.4...1 Icl adjustable
供电电压230 → 440 V
感应电流437 A
输出数量2
开关电流Relay outputs 100 mA at 12 V, DC
最大额定电流480 A
输出1频率3
最小输入电压24 V (<= 30 V)
最大功耗218 W for standard applications
典型相位噪声 (dBc/Hz)3
集电极-发射极击穿电压（最大）220 → 230 V
机械参数
深度339.7 mm
宽度304 mm
高度455 mm
重量50 kg
启动方式Start with torque control (current limited to 3.5 In)
连接器类型1 RJ45
安装样式With heat sink
总深度455mm
总宽度304mm
总长度339.7mm
位数3 phases
供应商器件封装ATS22
产品信息
用途AC-53A
系列ATS22
功能Internal bypass
协议Modbus
标签类型CE
CAD图纸3D CAD Model
产品子类型Soft starter
总线连接In the motor supply lineTo the motor delta terminals
通信接口Serial
测量范围Altistart 22
工作高度Vertical +/- 10 degree
控制/显示类型220 → 230 V
其他规格(LI1, LI2, LI3)logic 5 mA 4.3 kOhm
应用细节Severe and standard applications
RAM容量/已安装31
输入数量及类型3
适用产品/相关产品Asynchronous motors
环境参数
密封等级IP00
冷却类型Forced convection
湿度范围<= 95 % without condensation or dripping water conforming to EN/IEC 60068-2-3
抗冲击能力15 gn for 11 ms conforming to EN/IEC 60068-2-27
存储接口-25...70 °C
防护等级Level 2 conforming to IEC 60664-1
工作压力<= 1000 m without derating> 1000...< 2000 m with current derating of 2.2 % per additional 100 m
抗振性1 gn (f = 13...200 Hz) conforming to EN/IEC 60068-2-61.5 mm (f = 2...13 Hz) conforming to EN/IEC 60068-2-6
工作温度+40°C